FABRICATE
Milling Materials:

Vita North America

vita
Unique hybrid ceramic with a dual ceramic-polymer network structure. Available as mono- and multichromatic types in up to three translucency levels (T, HT, ST)
VITA ENAMIC® – A new definition of stability

INDICATIONS

  • Reconstructions with reduced wall thicknesses that preserve natural tooth structure
  • Posterior crowns that offer high load capacity in cases with limited space availability
  • Precise repair of small defects (e.g., indirect cervical fillings/delicate inlays)
  • Non-/minimally-invasive reconstruction of occlusal surfaces (table top)
  • Monolithic veneering structures for digital hybrid bridges


VITA SYSTEM 3D MASTER®


Translucent (T)*

0M1, 1M1, 1M2, 2M1, 2M2, 2M3, 3M1, 3M2, 3M3, 4M2

High Translucent (HT)**

0M1, 1M1, 1M2*, 2M1, 2M2, 2M3, 3M1, 3M2, 3M3, 4M2

Super Translucent (ST)***

1M1, 1M2, 2M2, 3M2, 4M2


*Limited range of shades for VITA ENAMIC IS-14 and Discs: IS-14 available in 1M1, 1M2, 2M2, 3M2 and 4M2; discs available in 1M2, 2M2 and 3M2.

**Limited range of shades for VITA ENAMIC IS-16 and discs: available in 1M1,1M2, 2M2, 3M2 and 4M2.

***Available in the EM-14 type.




vita enamic
vita enamic vita enamic


VITA ENAMIC®

Solutions for the following mills/grinders:

PRODUCTS MANUFACTURERS
N4 / R5 / S1 / S2 / Z4 vhf camfacture AG
CORiTEC line imes-icore GmbH
R.ders RXD line R.ders GmbH
DGSHAPE DWX line DGSHAPE Corporation
CS 3000 Carestream Dental, Inc
Zfx Inhouse5x Zfx GmbH
Milling UNIT M line Zirkonzahn S.r.l.
Organical Desktop line R+K CAD/CAM Technologie GmbH
DMG ULTRASONIC-line DMG Mori AG


DISCS (Ø 98.4 mm):

  • 12 mm, 18 mm


BLOCKS (mm):

  • EM-14 (12 x 14 x 18)
  • EM-10 (8 x 10 x 15)
VITA SUPRINITY PC – Zirconia-reinforced, high-strength glass ceramic generation

Available as monochromatic blanks in two translucency levels (T, HT)


High Reliability

Thanks to a zirconia-reinforced glass ceramic matrix

Precision-fit Results

Thanks to material blanks with high edge stability

Simple Processing

Thanks to good polishing characteristics and high firing stability

Brilliant Esthetics

Thanks to integrated translucency, opalescence and fluorescence



Recommended indications

  • Posterior crown
  • Anterior crown
  • Implant-supported crown
  • Veneer


vita suprinity pc
vita suprinity pc vita suprinity pc


VITA SUPRINITY PC

Solutions with universal holder system for the following mills/grinders:

PRODUCTS MANUFACTURERS
N4 / R5 / S1 / S2 / Z4 vhf camfacture AG
CORiTEC line imes-icore GmbH
R.ders RXD line R.ders GmbH
DGSHAPE DWX line DGSHAPE Corporation
CS 3000 Carestream Dental, Inc
Zfx Inhouse5x Zfx GmbH
Milling UNIT M line Zirkonzahn S.r.l.
Organical Desktop line R+K CAD/CAM Technologie GmbH
DMG ULTRASONIC-line DMG Mori AG